spec no: dsaa6306 rev no: v.7 date: mar/24/2005 page: 1 of 3 approved: j. lu checked: allen liu drawn: y.w.wang package dimension s l- 59egw - ca high efficiency red / gree n description the high efficiency red source color devices are made with gallium arsenide phosphide on gallium phosphide orange light emitting diode. the green source color devices are made with gallium phosphide green light emitting diode. t - 1 3/4 (5mm) bi - color indicator lamp features uniform light output. low power consumption. 3 leads with one common lead. i.c. compatible. long life - solid state reliability. rohs compliant. notes: 1. all dimensions are in millimeters (inches). 2. tolerance is 0.25(0.01") unless otherwise noted. 3. lead spacing is measured where the leads emerge from the package. 4. specifications are subject to change without notice.
spec no: dsaa6306 rev no: v.7 date: mar/24/2005 page: 2 of 3 approved: j. lu checked: allen liu drawn: y.w.wang selection guid e note: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. electrical / optical characteristics at t a =25 c absolute maximum ratings at t a =25 c notes: 1. 1/10 duty cycle, 0.1ms pulse width. 2. 2mm below package base. 3 . 5mm below package base. part no. dice lens type iv (mcd) @ 20ma viewing angle min. typ. 2 ? 1/2 l- 59egw - ca high efficiency red (gaasp/gap) 2.6 5 60 green (gap) 1.6 5 white diffused symbol parameter device typ. max. units test conditions peak peak wavelength high efficiency red green 627 565 nm i f =20ma d dominant wavelength high efficiency red green 625 568 nm i f =20ma ? 1/2 spectral line half - width high efficiency red green 45 30 nm i f =20ma c capacitance high efficiency red green 15 15 pf v f =0v;f=1mhz v f forward voltage high efficiency red green 2.0 2.2 2.5 2.5 v i f =20ma i r reverse current all 10 ua v r = 5v parameter high efficiency red green units power dissipation 105 105 mw dc forward current 30 25 ma peak forward current [1] 160 140 ma reverse voltage v operating/storage temperature - 40c to +85c lead solder temperature [2] 260c for 3 seconds 5 lead solder temperature [3] 260c for 5 seconds
spec no: dsaa6306 rev no: v.7 date: mar/24/2005 page: 3 of 3 approved: j. lu checked: allen liu drawn: y.w.wang high efficiency red / green l - 59egw - ca remarks: if special sorting is required (e.g. binning based on forward voltage, luminous intensity, or wavelength), the typical accuracy of the sorting process is as follows: 1. wavelength: +/ - 1nm 2. luminous intensity: +/ - 15% 3. forward voltage: +/ - 0.1v note: accuracy may depend on the sorting parameters.
|
